Cisco ASA 5516-X Hardware Installation Manual - Page 9

Browse online or download pdf Hardware Installation Manual for Network Hardware Cisco ASA 5516-X. Cisco ASA 5516-X 32 pages. Threat defense reimage guide
Also for Cisco ASA 5516-X: Quick Start Manual (8 pages), Easy Setup Manual (11 pages), Quick Start Manual (9 pages), Software Manual (37 pages), Mount And Connect (6 pages), Manual (14 pages)

Print Page
Cisco ASA 5516-X Hardware Installation Manual
Overview
LED
Status
Active
SSD
Network Port Status
On the rear panel, a pair of LEDs (Link status and connection Status) for each of the eight Gigabit Ethernet
network ports, and the Gigabit Ethernet Management port.
Link status (L):
• Unlit – No link, or port is not in use.
• Solid green – Link established.
• Flashing green – Link activity.
Connection-speed status (S):
• One blink every three seconds – 10 Mbps.
• Two rapid blinks – 100 Mbps.
• Three rapid blinks – 1000 Mbps.
Online Only
Description
System operating status:
• Green – Normal system function.
• Amber – Critical alarm indicating one or more of the following:
• Major failure of a hardware or software component.
• Over-temperature condition.
• Power voltage outside the tolerance range.
Status of the failover pair:
• Solid green – Failover pair operating normally.
• Unlit – Failover is not operational.
SSD LED behavior at first customer ship:
• Unlit – No SSD present.
• Green – SSD installed.
SSD LED behavior after June 2017:
• Unlit – No SSD present or no activity on the SSD.
• Green – Activity on the SSD.
Note
See
Replace the SSD , on page 27
SSD.

Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide

for information on replacing a failed
LEDs
5