Cisco ATA 191 Iniziare - Pagina 7

Sfoglia online o scarica il pdf Iniziare per Hardware di rete Cisco ATA 191. Cisco ATA 191 8. Analog telephone adapter
Anche per Cisco ATA 191: Manuale d'uso (30 pagine), Manuale di amministrazione (4 pagine), Manuale d'uso (10 pagine), Manuale (10 pagine), Manuale di avvio rapido (13 pagine), Manuale di configurazione (6 pagine), Manuale d'uso (40 pagine), Manuale d'uso (30 pagine)

Get Started with Your New ATA

Note

Insecure mounting might damage the ATA or cause injury. Cisco is not responsible for damages incurred

byinsecure wall-mounting.

Procedure

Step 1

Determine where you want to mount the unit. Verify that the surface is smooth, flat and dry.

Step 2

Drill two pilot holes into the surface 58 mm apart (about 2.28 in.).

Step 3

Insert a screw into each hole, leaving a gap of 5 mm (0.1968 in.) between the underside of each screw head

and the surface of the wall.

Step 4

Place the unit wall-mount slots over the screws and slide the unit down until the screws fit snugly into the

wall-mount slots.

Supported ATA Call Features

Depending on your system configuration, your ATA supports some or all the following call features:

Supported ATA Call Features

Get Started with Your New ATA