Cisco 2600 Series Panoramica - Pagina 4

Sfoglia online o scarica il pdf Panoramica per Porta d'ingresso Cisco 2600 Series. Cisco 2600 Series 13. Configuring adsl wic to support pppoe clients
Anche per Cisco 2600 Series: Manuale di installazione (12 pagine), Note di rilascio (32 pagine), Configurazione (15 pagine), Nota applicativa (41 pagine), Scheda tecnica (6 pagine), Appendice (15 pagine), Manuale di installazione (22 pagine), Manuale di avvio rapido (2 pagine), Manuale (5 pagine)

Stampa la pagina
Cisco 2600 Series Panoramica
Reading the Front-Panel LEDs
Table 1-2
LED
RPS
ACTIVITY
1. RPS = Redundant Power System
Figure 1-4
PWR
Table 1-3
LED
PWR
SYS/RPS
ACTIVITY
Cisco 2600 Series Routers Hardware Installation Guide
1-4
Cisco 2600 Series Routers with 1-RU Chassis Height—Front-Panel LED Descriptions
Description (continued)
1
Off—No RPS
is attached.
On—RPS is attached and operational.
Blinking—RPS is attached, but has a failure.
Off—In the Cisco IOS software, but no network activity.
Blink (500 ms ON, 500 ms OFF)—In ROMMON, no errors.
Blink (500 ms ON, 500 ms OFF, 2 seconds between codes)—In
ROMMON, error detected.
Blink (less than 500 ms)—In the Cisco IOS software, the blink rate
reflects the level of activity.
Cisco 2691—Front-Panel LEDs
SYS
ACT
RPS
Cisco 2691—Front-Panel LED Descriptions
Description
On—Power is applied to the router.
Rapid blinking—System is booting
Slow blinking—System error
On—System okay
Off—No system activity
Blinking—System activity
Chapter 1
Overview of Cisco 2600 Series Routers
OL-2171-06