Cisco 2600 Series 개요 - 페이지 4

{카테고리_이름} Cisco 2600 Series에 대한 개요을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2600 Series 13 페이지. Configuring adsl wic to support pppoe clients
Cisco 2600 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 릴리스 정보 (32 페이지), 구성 (15 페이지), 애플리케이션 노트 (41 페이지), 데이터시트 (6 페이지), 부록 (15 페이지), 설치 매뉴얼 (22 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (5 페이지)

페이지 인쇄
Cisco 2600 Series 개요
Reading the Front-Panel LEDs
Table 1-2
LED
RPS
ACTIVITY
1. RPS = Redundant Power System
Figure 1-4
PWR
Table 1-3
LED
PWR
SYS/RPS
ACTIVITY
Cisco 2600 Series Routers Hardware Installation Guide
1-4
Cisco 2600 Series Routers with 1-RU Chassis Height—Front-Panel LED Descriptions
Description (continued)
1
Off—No RPS
is attached.
On—RPS is attached and operational.
Blinking—RPS is attached, but has a failure.
Off—In the Cisco IOS software, but no network activity.
Blink (500 ms ON, 500 ms OFF)—In ROMMON, no errors.
Blink (500 ms ON, 500 ms OFF, 2 seconds between codes)—In
ROMMON, error detected.
Blink (less than 500 ms)—In the Cisco IOS software, the blink rate
reflects the level of activity.
Cisco 2691—Front-Panel LEDs
SYS
ACT
RPS
Cisco 2691—Front-Panel LED Descriptions
Description
On—Power is applied to the router.
Rapid blinking—System is booting
Slow blinking—System error
On—System okay
Off—No system activity
Blinking—System activity
Chapter 1
Overview of Cisco 2600 Series Routers
OL-2171-06