Cisco 2600 Series Visão geral - Página 4

Procurar online ou descarregar pdf Visão geral para Porta de entrada Cisco 2600 Series. Cisco 2600 Series 13 páginas. Configuring adsl wic to support pppoe clients
Também para Cisco 2600 Series: Manual de instalação (12 páginas), Notas de lançamento (32 páginas), Configuração (15 páginas), Nota de aplicação (41 páginas), Ficha de dados (6 páginas), Apêndice (15 páginas), Manual de instalação (22 páginas), Manual de início rápido (2 páginas), Manual (5 páginas)

Imprimir página
Cisco 2600 Series Visão geral
Reading the Front-Panel LEDs
Table 1-2
LED
RPS
ACTIVITY
1. RPS = Redundant Power System
Figure 1-4
PWR
Table 1-3
LED
PWR
SYS/RPS
ACTIVITY
Cisco 2600 Series Routers Hardware Installation Guide
1-4
Cisco 2600 Series Routers with 1-RU Chassis Height—Front-Panel LED Descriptions
Description (continued)
1
Off—No RPS
is attached.
On—RPS is attached and operational.
Blinking—RPS is attached, but has a failure.
Off—In the Cisco IOS software, but no network activity.
Blink (500 ms ON, 500 ms OFF)—In ROMMON, no errors.
Blink (500 ms ON, 500 ms OFF, 2 seconds between codes)—In
ROMMON, error detected.
Blink (less than 500 ms)—In the Cisco IOS software, the blink rate
reflects the level of activity.
Cisco 2691—Front-Panel LEDs
SYS
ACT
RPS
Cisco 2691—Front-Panel LED Descriptions
Description
On—Power is applied to the router.
Rapid blinking—System is booting
Slow blinking—System error
On—System okay
Off—No system activity
Blinking—System activity
Chapter 1
Overview of Cisco 2600 Series Routers
OL-2171-06