Motorola MaxTrac 300 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Radio Motorola MaxTrac 300. Motorola MaxTrac 300 10. 6-frequency conventional fm radio
Anche per Motorola MaxTrac 300: Manuale di istruzioni per l'uso (37 pagine), Istruzioni per l'uso (2 pagine)

Stampa la pagina

Temporarily skip a channel:

You can skip a busy channel without removing it from the programmed channels

permanently. While the scan is stopped on a channel, press and hold the [Select] button

for 2 seconds until you hear the second beep. The radio will then continue scanning and

ignore that channel until you stop the scan or power off the radio. However, that won't

ignore the channel you were on when the scan was initially started. In this case, you

should start the scan from a different channel, then use this procedure to skip the

channel.

Antenna connector:

image. Do the same to set Priority Two, which will be

indicated by a solid [Pri] led as shown in the image at the

top of the next page.

Priority scan 2 with a solid green LED in the top right

corner.

The antenna connector on the back of

this radios is called a "Mini UHF".

As you can see in the image to the left,

I use an adapter to allow a more

standard "PL 259" connector to be

used.