Motorola MaxTrac 300 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Радіо Motorola MaxTrac 300. Motorola MaxTrac 300 10 сторінок. 6-frequency conventional fm radio
Також для Motorola MaxTrac 300: Інструкція з експлуатації Посібник з експлуатації (37 сторінок), Інструкція з експлуатації (2 сторінок)

Temporarily skip a channel:

You can skip a busy channel without removing it from the programmed channels

permanently. While the scan is stopped on a channel, press and hold the [Select] button

for 2 seconds until you hear the second beep. The radio will then continue scanning and

ignore that channel until you stop the scan or power off the radio. However, that won't

ignore the channel you were on when the scan was initially started. In this case, you

should start the scan from a different channel, then use this procedure to skip the

channel.

image. Do the same to set Priority Two, which will be

indicated by a solid [Pri] led as shown in the image at the

top of the next page.

Priority scan 2 with a solid green LED in the top right

corner.

The antenna connector on the back of

this radios is called a "Mini UHF".

As you can see in the image to the left,

I use an adapter to allow a more

standard "PL 259" connector to be

used.