Motorola MaxTrac 300 Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Rádio Motorola MaxTrac 300. Motorola MaxTrac 300 10 páginas. 6-frequency conventional fm radio
Também para Motorola MaxTrac 300: Manual de Instruções (37 páginas), Instruções de utilização (2 páginas)
Imprimir página
Temporarily skip a channel:
You can skip a busy channel without removing it from the programmed channels
permanently. While the scan is stopped on a channel, press and hold the [Select] button
for 2 seconds until you hear the second beep. The radio will then continue scanning and
ignore that channel until you stop the scan or power off the radio. However, that won't
ignore the channel you were on when the scan was initially started. In this case, you
should start the scan from a different channel, then use this procedure to skip the
channel.
Antenna connector:
image. Do the same to set Priority Two, which will be
indicated by a solid [Pri] led as shown in the image at the
top of the next page.
Priority scan 2 with a solid green LED in the top right
corner.
The antenna connector on the back of
this radios is called a "Mini UHF".
As you can see in the image to the left,
I use an adapter to allow a more
standard "PL 259" connector to be
used.
8