Clarke CON14110 Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Sega Clarke CON14110. Clarke CON14110 17. 355mm 110 v abrasive cut-off saw
Stampa la pagina
TO CHANGE THE SPACING BETWEEN THE FENCE AND VICE
1. Use the wrench provided to loosen
and remove the two fence bolts.
2. Adjust the fence to the desired
position.
3. Replace the fence bolts and
tighten securely before use.
DEPTH STOP
The depth stop is set at the factory for
a new 14" (355mm) cutting disc. This
can be adjusted as the wheel wears.
1. Loosen the jam nut.
2. Loosen the depth stop bolt.
3. Adjust the bolt to desired height.
4. Then turn the jam nut until seated
firmly against the casting.
• Securely tighten the depth stop bolt before use.
CAUTION: WHEN CHANGING TO A NEW CUTTING DISC, RE-ADJUST THE
DEPTH STOP TO THE ORIGINAL POSITION TO PREVENT CUTTING INTO THE
SUPPORTING SURFACE.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10