Clarke CON14110 Manual de Instruções de Operação e Manutenção - Página 10
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Serra Clarke CON14110. Clarke CON14110 17 páginas. 355mm 110 v abrasive cut-off saw
Imprimir página
TO CHANGE THE SPACING BETWEEN THE FENCE AND VICE
1. Use the wrench provided to loosen
and remove the two fence bolts.
2. Adjust the fence to the desired
position.
3. Replace the fence bolts and
tighten securely before use.
DEPTH STOP
The depth stop is set at the factory for
a new 14" (355mm) cutting disc. This
can be adjusted as the wheel wears.
1. Loosen the jam nut.
2. Loosen the depth stop bolt.
3. Adjust the bolt to desired height.
4. Then turn the jam nut until seated
firmly against the casting.
• Securely tighten the depth stop bolt before use.
CAUTION: WHEN CHANGING TO A NEW CUTTING DISC, RE-ADJUST THE
DEPTH STOP TO THE ORIGINAL POSITION TO PREVENT CUTTING INTO THE
SUPPORTING SURFACE.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10