aluexbeams ALUEX10+ Istruzioni per l'uso - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per l'uso per Sistemi di sollevamento aluexbeams ALUEX10+. aluexbeams ALUEX10+ 4.

Commissioning

Before commissioning, the user must check that all the parts of the lift spreader are present. All parts

should be checked to ensure that they are not damaged. If defects are discovered during commissioning, the

lift spreader must be returned to the dealer. Commissioning must take place as directed in the instructions

for use. The lift spreader must be assembled as shown in

Figure 5:

Lift spreader assembled

The lift spreader can be used outdoors. The lift spreader must be used at temperatures between -35 °C and

50 °C. The lift spreader is able to withstand moisture, but it must be dried and cleaned after use

storage.

Use

The lift spreader is adjusted to the correct length prior to use. All adjusting beams must always be set to the same

length when used

(see Figure

fastening of the pins must always be checked prior to use. The correct length is always the same length as or

shorter than the width of the object max 6° angle

points at the ends of the spreader.

When lifting using chains, hooks and suchlike must not touch the lift spreader itself.

Use the enclosed link

(part 4 in Figure 4)

The lift spreader must only be used within its lifting range and at an appropriate temperature. The lift spreader

cannot guarantee the correct type of lifting situation, or that the lifting line will not break.

Under no circumstances must the lift spreader be used in a manner not specified in the instructions for use.

Attachment at any location other than the attachment points is strictly prohibited!

The lift spreader may be used for a maximum of 16,000 load cycles

The lifting spreader must not be exposed to foreign objects such as acids, chemicals, etc

Protective gloves must be worn when handling the spreader

alue \ beams

6). The length of the spreader must always be adjusted using the guide pins. The

(see Figure

when lifting with chains

Figure

7). The lifting straps are attached to the attachment

(see figure 8)

(see Figure

8).

(See Figure 9)

Page 2/4

Instructions for use

original

and

before