Ambient Technologies RCMT Manuale di installazione e istruzioni per l'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale di installazione e istruzioni per l'uso per Telecomando Ambient Technologies RCMT. Ambient Technologies RCMT 7. Manual on/off remote control with timer
Anche per Ambient Technologies RCMT: Istruzioni per l'installazione e il funzionamento (2 pagine)
Stampa la pagina
Manual Mode
1. Press the ON button once to turn on the appliance. Press the OFF button to turn it off.
Timer Mode
1. Press the TIMER button once to start the timer, 90 min as shown in the left Figure.
Keep pressing the TIMER button to set up timer to 60 or 30 min as desired. Three
seconds later, the tranmsitter will turn on the fireplace.
2. Once the timer starts to count down to 0 min, the transmitter will send off signal and
turn off the fireplace.
3. Press the OFF button to exit the timer mode and the transmitter will shut off the
fireplace.
Low Battery Detection
1. When the battery voltage drops to a certain level, the LED on the transmitter will
blink until the battery expires. Change the battery before the battery is too weak for
normal operation. TURN THE UNIT OFF BEFORE REPLACING
BATTERIES.
Child-Proof Protection
1. Press and hold the ON button and the OFF button simultaneously for 3 seconds to
enter child-proof mode.
2. The transmitter will not work until child-proof mode is deactivated by pressing the e
ON button and the OFF button simultaneously for 3 seconds again to exit child-
proof mode.
Transmitter Thermal Shutdown
1. If transmitter measures a room temperature exceeding 99 degrees Fahrenheit, the
LCD will display "HI" and the transmitter will turn off the appliance.
2. Transmitter will not function until the room temperature has dropped below 99
degree Fahrenheit.
3. If transmitter measures a room temperature less than 40 degrees Fahrenheit, the LCD
will display "LO" and NO SIGNAL will be sent to turn on the appliance.
Receiver
Low Battery Detection
When the battery voltage drops to a certain level, which is checked once a minute, the low-battery LED will start
to blink and the receiver will automatically turn off the appliance. The receiver will not function again until
fresh batteries are installed.
50D0103 RCMT Rel 1 02/10/2006
Page 5 of 7
Ambient Technologies
A Division Of Monessen Hearth Systems