GPS astra telematics AT110V5のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。astra telematics AT110V5 5 ページ。 Advanced vehicle tracking device
astra telematics AT110V5 にも: ユーザーマニュアル (11 ページ)

Version 1.0
AT110V5 Installation Guide
1. Install the Antenna
Choose a suitable location for the antenna, with a good 'view' of the sky for optimum GPS
reception, according to the antenna type supplied:
a. AE001 – under the dashboard, adhesive side down
b. AE002 – roof mounted, requiring a hole in the panel
c. AE003 – windscreen mounted, adhesive to the glass, typically in the bottom corner of
the screen
d. AE004 – separate GPS and GSM antennas. GPS to be fitted adhesive side down and
GSM to be fitted at least 0.5m away, avoiding close proximity to metal or
loudspeakers
2. Plug-in the antenna GSM and GPS to the corresponding connectors on the
AT110
Apply direct force when connecting and disconnecting the antennas. Do not waggle from
side to side or apply excessive sideways force, to avoid damage to the device.
3. Hook up the power and ignition electrical connections using the CB110 cable
a. Connect the BLACK wire to GND and the RED wire to a PERMANENT +12V/+24V
vehicle power source. Connect the ignition sense input (digital input 1) to an ignition
switched 12/24V signal (i.e. something that only goes live when the vehicle ignition is
ON)
i. RED
ii. BLACK
iii. WHITE
PLUG IN ANTENNAS HERE
PERMANENT +12 / +24V
GROUND
IGNITION SWITCHED +12/24V
1A FUSED
1A FUSED
1A FUSED