- ページ 37

オール・イン・ワン・プリンター Canon PIXMA MX850のPDF ネットワーク設定マニュアルをオンラインで閲覧またはダウンロードできます。Canon PIXMA MX850 43 ページ。 Multifunction brochure
Canon PIXMA MX850 にも：補足マニュアル (6 ページ), セットアップ方法 (2 ページ), パンフレット (2 ページ)

ページを印刷する

"Communication with the Card Slot failed." is displayed

Cause

The network setup of the Card Slot

fails.

Wait for a while, then click Retry.

(1)Retry

Click to retry the network setup of the Card Slot.

(2)Skip

Click to continue installation without the network setup of the Card Slot.

If it fails again after clicking Retry, follow the procedure below.

Make sure that the computer is communicating with the network properly,

then try again.

Disable the Windows Firewall function, or open port 137:139 to allow

communication with the machine following the procedure below. For

information on other security software, refer to its instruction manual or

contact its manufacturer.

Important

If you disabled the firewall function, disconnect your network from the

Internet. To do this, configure your router not to connect to the Internet or

WAN.

To disable the Windows Firewall:

(1)Click Start > Control Panel > Security Center > Windows Firewall.

(2)Select Off, and click OK.

To open port 137:139:

(1)Click Start > Control Panel > Security Center > Windows Firewall.

(2)Select the Exceptions tab, and click Add port.

(3)On the Add a Port dialog box, input the following information, and click

OK.

Name: Input any name for the port.

Port number: Input "137".

TCP/UDP: Select TCP.

(4)Repeat steps (2) and (3). On the Add a Port dialog box, input the same

information as you did in step (3) except for selecting UDP in TCP/UDP.

(5)Use the same procedure to open the other ports (138TCP, 138UDP,

139TCP, and 139UDP).

(6)Confirm that the port names are added on the Exceptions sheet, and

click OK.

Action

(1)

(2)

Troubleshooting