- ページ 7

マイク Dotterel KonosのPDF 製品取扱説明書をオンラインで閲覧またはダウンロードできます。Dotterel Konos 11 ページ。
Dotterel Konos にも：製品取扱説明書 (8 ページ)

4. Switch the processor box on, by pressing the Power button (1). A ring of green

light will illuminate around it indicating that the unit has been turned on.

Note: The Power button turns off both the battery and the DC power.

5. Check that your microphone is on and working. Plug an audio output device

into the XLR port (4) on the processor box and speak into the microphone. If

there is sound output, then your Konos microphone is working.

6. Test that all three beam width settings are working.

Turn the Adjustable Directivity Dial (6) to each beam width as follows:

narrow (60 degrees, captures sound right in front of microphone)

medium (100 degrees)

wide (180 degrees, any sound source not falling in this beam width

will be rejected).