Dotterel Konos 제품 사용 설명서 - 페이지 7

{카테고리_이름} Dotterel Konos에 대한 제품 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dotterel Konos 11 페이지.
Dotterel Konos에 대해서도 마찬가지입니다: 제품 사용 설명서 (8 페이지)

4. Switch the processor box on, by pressing the Power button (1). A ring of green

light will illuminate around it indicating that the unit has been turned on.

Note: The Power button turns off both the battery and the DC power.

5. Check that your microphone is on and working. Plug an audio output device

into the XLR port (4) on the processor box and speak into the microphone. If

there is sound output, then your Konos microphone is working.

6. Test that all three beam width settings are working.

Turn the Adjustable Directivity Dial (6) to each beam width as follows:

narrow (60 degrees, captures sound right in front of microphone)

medium (100 degrees)

wide (180 degrees, any sound source not falling in this beam width

will be rejected).