Dotterel Konos Посібник користувача продукту - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача продукту для Мікрофон Dotterel Konos. Dotterel Konos 11 сторінок.
Також для Dotterel Konos: Посібник користувача продукту (8 сторінок)

Друкувати сторінку

4. Switch the processor box on, by pressing the Power button (1). A ring of green

light will illuminate around it indicating that the unit has been turned on.

Note: The Power button turns off both the battery and the DC power.

5. Check that your microphone is on and working. Plug an audio output device

into the XLR port (4) on the processor box and speak into the microphone. If

there is sound output, then your Konos microphone is working.

6. Test that all three beam width settings are working.

Turn the Adjustable Directivity Dial (6) to each beam width as follows:

narrow (60 degrees, captures sound right in front of microphone)

medium (100 degrees)

wide (180 degrees, any sound source not falling in this beam width

will be rejected).