計測機器 Amptek MCA8000DのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Amptek MCA8000D 6 ページ。

MCA8000D QUICK START GUIDE (FW6)

Amptek's MCA8000D is a state-of-the-art, compact, high performance, digital

Multichannel Analyzer (MCA). It replaces the MCA8000A, providing the same

functionality with reduced dead time, modern communications interfaces (USB, RS-

232, and Ethernet), and much higher data transfer rates.

MCA8000D Software Installation

Step 1: Install the WINUSB Driver

IT IS HIGHLY RECOMMENDED TO USE WINDOWS UPDATE TO INSTALL THE WINUSB DRIVER.

If the computer's operating system is Windows 7 (32 or 64-bit) and has access to the internet, go to

"Windows 7 WINUSB Installation through Windows Update."

If the computer's operating system is Windows XP 32-bit and has access to the internet, go to

"Windows XP WINUSB Installation through Windows Update."

If the computer does not have access to the internet, or if you are using an unsupported operating system,

install the driver manually using the "Manual WINUSB Driver Installation Instructions" found on the CD and the

website at http://www.amptek.com/winusb.html. When performing a manual installation, follow the instructions

precisely and carefully. Making an incorrect selection will install the wrong driver and make it difficult, error-

prone, and time consuming to remove the incorrect driver from the computer.

Windows 7 WINUSB Installation through Windows Update

1. Power the device and connect it to the computer using the supplied USB cable.

2. Windows will show the balloon on the bottom right side of the screen.

3. Click on the balloon to see the details. You will see the following dialogs.

4. The WINUSB driver is now installed and ready for use. Go to Step 2 to install the DPPMCA display and

acquisition software.

Amptek Inc.

MCA8000D Quick Start Guide Rev A0

Page 1 of 6