投影スクリーン Draper ParagonのPDF 仕様をオンラインで閲覧またはダウンロードできます。Draper Paragon 2 ページ。 220v electric screen
Draper Paragon にも：設置および操作説明書 (2 ページ), 取付・取扱説明書 (2 ページ), 取付・取扱説明書 (2 ページ)

ページを印刷する

Paragon

Speciﬁ cations—Paragon

projection screens, size

electrically operated 110-120v AC 60 Hz. 3-wire motor mounted inside

screen roller, 2.5 amp draw, instantly reversible, lifetime lubricated,

with internal thermal overload protector and mechanical brake. Motor

mounted with sound-absorbing ﬁ xtures. Left hand motor location only.

Preset, accessible limit switches. J-box inside case accessible via 22

ga. steel cover plate. Entire roller and drive assembly easily removable

through bottom of case.

Roller to be 6" OD x

" wall steel tube. Roller brackets to be painted

white and to have double row radial ball bearings. Viewing surface to

be ([GREENGUARD for Children and Schools certiﬁ ed Matt White]

[Glass Beaded]), ﬂ ame and mildew resistant. Matt White and High

Contrast Grey viewing surfaces shall qualify as low emitting and

meet all of the requirements of the GREENGUARD for Children and

Schools and GREENGUARD certiﬁ cation program, which are: emissions of total volatile

organic compounds < 0.22 mg/m

, formaldehyde < 0.0135 ppm, total aldehydes < 0.043

ppm, individual volatile organic compounds < 1/1000 TLV and < ½ chronic REL and

total phthalates < 0.01 mg/m

. Dowel shall be 1½" OD steel tube with black polyethylene

endcaps.

Case constructed of extruded aluminum. Bottom of case fully enclosed except for slot

allowing fabric passage. Bottom closure panel shall be extruded aluminum, ﬁ nished white,

and may be removed manually for access to roller and drive unit. Closure panel shall be

held in place by screw and bracket at each end of case. Aluminum endplates with integrated

steel brackets for suspended mounting shall be fastened to extruded case with thread-

cutting screws. Eyebolts shall be provided for use in hoisting screen. Case support brackets

shall be welded steel channel, riveted to exterior of case.

Three-position control switch (or switches—specify number) shall stop or reverse screen at

any point. Controls to be furnished complete with cover plate.

Entire unit certiﬁ ed by Underwriters' Laboratories, Inc. for the U.S. and Canada. Suitable

for use in environmental air space in accordance with Section 300-22 (c) of the National

Electrical Code, and Sections 2-128, 12-010 (3) and 12-100 of the Canadian Electrical

Code, Part 1, CSA C22.1. U.S. Patent No. 6,873,461.

Options:

Wall Mount Bracket Kit: Kit includes two structural steel brackets and hardware to attach

brackets to case. Hardware for mounting to wall structure by others.

Endcap Ceiling Tile Flange Kit: Extruded aluminum, ﬁ nished white. Attaches to endcaps.

Each kit contains two (2) ﬂ ange pieces and hardware for attaching trim ﬂ anges to endcaps.

Ceiling Tile Flange for Front of Case: Each kit includes 12' extruded aluminum, ﬁ nished

white. Attaches to front of case. Hardware for attachment to case included.

Downloadable 3-part speciﬁ cations are available at www.draperinc.com.

Please Mark Appropriate Selections

Select Viewing Surface:

Matt White

Glass Beaded

Optional Accessories:

Extra Screen Drop (Total screen height cannot exceed 24')

Same color as viewing surface (standard on AV format screens)

Black (standard on all other formats)

Length of total drop

Black Masking Borders (Optional on AV format, standard on all others)

Wall Mount Bracket Kit (Includes two brackets)

Endcap Ceiling Tile Flange Kit (2 per kit)

Ceiling Tile Flange for front and/or rear of case (12' lengths)

How many 12' lengths do you need?

Control Options:

Please Note: This Draper motorized screen comes with one 110V-120V AC

3-position wall switch (silver wall plate with black rocker)

Total number of 110-120V AC switches (switches operate independently)

Substitute white switch(es) for silver wall plate with black rocker

Serial or Network Communication (Complete Serial & Network Control Planning Sheet)

Optional Low Voltage Control Module (LVC-III)

24 Volt 3-Button Switch

Radio Frequency Remote Control (only with 24v)

Infrared Remote Control (only with 24v)

Optional Key Operated Switch

Power Supply Key Switch (On-off)

3-Position Key Control

3-Position Switch with Hinged Key-Locking Coverplate

Optional Video Interface Control

VIC-115

Override Switch

VIC-12

Override Switch

VIC-6

Override Switch

Large Electrically Operated Projection Screen

With Motor–In–Roller

h. x

w.,

EcoVision

Part of the Draper

EcoVision™ range

of products

Number of 24V switches:

(VICs are compatible only with the

Override Switch, and not with any

other wall switches or controls)

Printed in U.S.A.

Dimensions & Data

Size

H x W

AV Format

15' x 20'

20' x 20'

11' x 22'

16½' x 22'

22' x 22'

12' x 24'

18' x 24'

24' x 24'

13' x 26'

19½' x 26'

14' x 28'

21' x 28'

Nominal

Image

Diagonal

Area H x W

4:3 NTSC Video Format

25'

177" x 236"

27½'

194" x 260"

30'

212" x 284"

32½'

230" x 308"

35'

248" x 332"

16:9 HDTV Video Format

270"

133" x 236"

300"

146" x 260"

324"

160" x 284"

354"

173" x 308"

384"

187" x 332"

Custom Size

Case Dimensions 13¼" high x 12" deep. Optional wall mounting brackets extend

1¾" beyond each end of case (hole centers are 1" from end of case).

Paragons with cases longer than 300" require special handling.

rod (for suspending

screen) by others.

" -16 threaded rod

(use for adjusting

deflection in extremely

long units) by others.

Knockouts for electrical connections

12"

(two per end) with plastic plugs*

*Left hand motor location only on Paragon

Please see back page for dimensional diagrams of case and

optional wall mounting bracket

PROJECT:

ARCHITECT:

CONTRACTOR:

SUPPLIER:

DATE:

Case

Net Wt.

Length

(Lbs.)

250"

440

250"

450

274"

484

274"

494

274"

504

298"

528

298"

538

298"

548

322"

572

322"

582

346"

616

346"

626

Overall

Case

Net Wt.

Size

Length

(lbs.)

182" x 240"

250"

440

199" x 264"

274"

484

217" x 288"

298"

528

235" x 312"

322"

572

253" x 336"

346"

616

138" x 240"

250"

440

151" x 264"

274"

484

165" x 288"

298"

528

178" x 312"

322"

572

192" x 336"

346"

616

" threaded

Eyebolts for hoisting screen

(do not lift screen by center of case).

Case support brackets.

REVISED:

Qty.