- ページ 5

投影スクリーン Draper TargaのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Draper Targa 8 ページ。 Electrically operated projection screen with motor-in-roller
Draper Targa にも： 取付・取扱説明書 (4 ページ), 取付・取扱説明書 (2 ページ), 取付・取扱説明書 (2 ページ), 取付・取扱説明書 (2 ページ), 取付・取扱説明書 (4 ページ), 取付・取扱説明書 (2 ページ), 取付・取扱説明書 (3 ページ), 設置および操作説明書 (4 ページ), 取付・取扱説明書 (2 ページ), 取付・取扱説明書 (2 ページ)

ページを印刷する
Draper Targa 取扱説明書
Targa

Section 5 - Accessing Internal Low-Voltage Control Unit

PLEASE NOTE: Applies ONLY if Unit is built into case.
1. Locate LVC-IV Unit.
2. Remove the two
star head screws from the motor end of the screen housing.
(2)
3. Remove the access panel with the LVC-IV from the screen housing.
PLEASE NOTE: Internal LVC-IV will increase overall case length by 1 13/16"
WIRING DIAGRAM -
Internal LVC-IV - Single or Multiple Projection Screen Wiring Diagram
INTERNAL SCREEN WIRING
Green/Yellow
(Motor Ground)
Red (Up)
Black (Down)
White (Common)
GND
N
To
110-120 VAC
L1
Line
Remove two (2)
screws from
endcap.
Internal LVC-IV - Single or Multiple
Internal LVC-IV
(Low-Voltage Control Module)
Projection Screen Wiring Diagram
Green/Yellow (Ground)
Red-to screen (directional)
Brown-to screen (directional)
White -Common to screen & 110V-120V AC Neutral
Yellow-to 110V-120V AC-Hot
Black-to 110V-120V AC-Hot
Location of key
operated on-off
switch if furnished.
Dashed wiring by electrician
Low-voltage wiring by others
Factory wiring

(LVC-IV)

.
(46 mm)
Remove
access panel
with LVC-IV.
*A second electrical connection hole
is included in the screen housing
in order to separate Low-Voltage
and High-Voltage Wiring.
Receiver
Button
3-Button Wall Switch
DOWN - Black
COM - White
UP - Red
Electrically Straight
Data Cable to more
LVC-IV modules.*
RS232/485
Inputs/Outputs
IR Eye Input
Low-Voltage
Trigger
4-28 VDC
page 5 of 8
Electrical
Connection
Hole*
Wall Switch
*A maximum of six (6)
LVC-IV modules can be
linked together.