- ページ 5

サンダー Draper 16061のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Draper 16061 20 ページ。 400w 230v oscillating multi-tool kit
Draper 16061 にも：インストラクション (16 ページ)

INTRODUCTION

For detail and finishing work such as sanding, cutting, scraping, etc. It is intended for

domestic and light commercial use only. Any other application is considered as misuse.

Stock no. ............................................................................................................................. 16061

Part no. ........................................................................................................................ MT400(SF)

Rated voltage .............................................................................................................230V~50Hz

Rated input ........................................................................................................................ 400W

Revolutions per minute (no load) ................................................................15,000 -22,000opm

Sound pressure level .................................................................................................. 84.51dB(A)

Sound power level ..................................................................................................... 95.51dB(A)

Vibration level ...............................................................................................................3.844m/s

Weight .............................................................................................................................. 1.45kg

4.3 HANDLING & STORAGE

Although this machine is small in size, care must still be taken when handling and lifting.

Dropping this machine will have an effect on the accuracy and may also result in personal

injury. This machine is not a toy and must be respected.

The environment will have a negative result on its operation if you are not careful. If the air

is damp, components will rust. If the machine is unprotected from dust and debris;

components will become clogged: And if not cleaned and maintained correctly or regularly

the machine will not perform at its best.