Draper 16061 사용 설명서 - 페이지 5

{카테고리_이름} Draper 16061에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 16061 20 페이지. 400w 230v oscillating multi-tool kit
Draper 16061에 대해서도 마찬가지입니다: 대상 지침 (16 페이지)

페이지 인쇄

INTRODUCTION

4.1 SCOPE

For detail and finishing work such as sanding, cutting, scraping, etc. It is intended for

domestic and light commercial use only. Any other application is considered as misuse.

4.2 SPECIFICATION

Stock no. ............................................................................................................................. 16061

Part no. ........................................................................................................................ MT400(SF)

Rated voltage .............................................................................................................230V~50Hz

Rated input ........................................................................................................................ 400W

Revolutions per minute (no load) ................................................................15,000 -22,000opm

Sound pressure level .................................................................................................. 84.51dB(A)

Sound power level ..................................................................................................... 95.51dB(A)

Vibration level ...............................................................................................................3.844m/s

Weight .............................................................................................................................. 1.45kg

4.3 HANDLING & STORAGE

Although this machine is small in size, care must still be taken when handling and lifting.

Dropping this machine will have an effect on the accuracy and may also result in personal

injury. This machine is not a toy and must be respected.

The environment will have a negative result on its operation if you are not careful. If the air

is damp, components will rust. If the machine is unprotected from dust and debris;

components will become clogged: And if not cleaned and maintained correctly or regularly

the machine will not perform at its best.