Draper 16061 Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Draper 16061. Draper 16061 20 pagina's. 400w 230v oscillating multi-tool kit
Ook voor Draper 16061: Instructies voor (16 pagina's)
Pagina afdrukken
4.
INTRODUCTION
4.1 SCOPE
For detail and finishing work such as sanding, cutting, scraping, etc. It is intended for
domestic and light commercial use only. Any other application is considered as misuse.
4.2 SPECIFICATION
Stock no. ............................................................................................................................. 16061
Part no. ........................................................................................................................ MT400(SF)
Rated voltage .............................................................................................................230V~50Hz
Rated input ........................................................................................................................ 400W
Revolutions per minute (no load) ................................................................15,000 -22,000opm
Sound pressure level .................................................................................................. 84.51dB(A)
Sound power level ..................................................................................................... 95.51dB(A)
Vibration level ...............................................................................................................3.844m/s
2
Weight .............................................................................................................................. 1.45kg
4.3 HANDLING & STORAGE
Although this machine is small in size, care must still be taken when handling and lifting.
Dropping this machine will have an effect on the accuracy and may also result in personal
injury. This machine is not a toy and must be respected.
The environment will have a negative result on its operation if you are not careful. If the air
is damp, components will rust. If the machine is unprotected from dust and debris;
components will become clogged: And if not cleaned and maintained correctly or regularly
the machine will not perform at its best.
5