- ページ 2
スピーカー Anchor AN-135+のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anchor AN-135+ 4 ページ。 Surface mount speaker
Anchor AN-135+ にも： オーナーズマニュアル (2 ページ), オーナーズマニュアル (14 ページ), オーナーズマニュアル (14 ページ)
ページを印刷する
AN-135+ Speaker Monitor Owners Manual
ARChITECTS' SPECIFICATION
The speaker shall be an Anchor AN-135+ or equivalent.
The general construction shall include an injection-
molded case, one 4.5" Neodymium woofer and input
terminations consisting of both 3.5 mm and 1/4" phone.
The maximum speaker dimensions shall not exceed
5.25" high, 8.4" wide and 9" deep. The maximum
weight shall be 3.5 pounds.
The case shall be formed by injection-molded ABS, and
shall have a finish of black or white.
The speaker has the ability to be mounted on walls,
ceilings, equipment racks and speaker stands with
appropriate hardware and accessories.
MOUNTING BRACKETS
SB-3BK+
40° tilt bracket
A multi-purpose bracket used
for mounting the AN-135+ to
a wall or ceiling.
Waste electrical and electronic products must not be disposed of with
household waste. Please recycle where facilities exist. Check with
your Local Authority or Retailer for recycling advice.
SB-360BK+
360° swivel bracket
A multi-purpose bracket used for
mounting the AN-135+ to a wall
or ceiling.
(1/4" PHONE)
BACK PANEL OF AN-135+
NOTE: When connecting multiple AN-135+ units (daisy chaining) stereo cable
MUST be used to avoid interference.
LINE IN
MADE IN USA
SIX YEAR WARRANTY
LINE IN/LINE OUT
(3.5 MM)
POWER ON
2