Anchor AN-135+ Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери Anchor AN-135+. Anchor AN-135+ 4 сторінки. Surface mount speaker
Також для Anchor AN-135+: Посібник користувача (2 сторінок), Посібник користувача (14 сторінок), Посібник користувача (14 сторінок)

AN-135+ Speaker Monitor Owners Manual

ARChITECTS' SPECIFICATION

The speaker shall be an Anchor AN-135+ or equivalent.

The general construction shall include an injection-

molded case, one 4.5" Neodymium woofer and input

terminations consisting of both 3.5 mm and 1/4" phone.

The maximum speaker dimensions shall not exceed

5.25" high, 8.4" wide and 9" deep. The maximum

weight shall be 3.5 pounds.

The case shall be formed by injection-molded ABS, and

shall have a finish of black or white.

The speaker has the ability to be mounted on walls,

ceilings, equipment racks and speaker stands with

appropriate hardware and accessories.

MOUNTING BRACKETS

SB-3BK+

40° tilt bracket

A multi-purpose bracket used

for mounting the AN-135+ to

a wall or ceiling.

Waste electrical and electronic products must not be disposed of with

household waste. Please recycle where facilities exist. Check with

your Local Authority or Retailer for recycling advice.

SB-360BK+

360° swivel bracket

A multi-purpose bracket used for

mounting the AN-135+ to a wall

or ceiling.

(1/4" PHONE)

BACK PANEL OF AN-135+

NOTE: When connecting multiple AN-135+ units (daisy chaining) stereo cable

MUST be used to avoid interference.

LINE IN

MADE IN USA

SIX YEAR WARRANTY

LINE IN/LINE OUT

(3.5 MM)

POWER ON