Anchor AN-135+ 소유자 매뉴얼 - 페이지 2
{카테고리_이름} Anchor AN-135+에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor AN-135+ 4 페이지. Surface mount speaker
Anchor AN-135+에 대해서도 마찬가지입니다: 소유자 매뉴얼 (2 페이지), 소유자 매뉴얼 (14 페이지), 소유자 매뉴얼 (14 페이지)
페이지 인쇄
AN-135+ Speaker Monitor Owners Manual
ARChITECTS' SPECIFICATION
The speaker shall be an Anchor AN-135+ or equivalent.
The general construction shall include an injection-
molded case, one 4.5" Neodymium woofer and input
terminations consisting of both 3.5 mm and 1/4" phone.
The maximum speaker dimensions shall not exceed
5.25" high, 8.4" wide and 9" deep. The maximum
weight shall be 3.5 pounds.
The case shall be formed by injection-molded ABS, and
shall have a finish of black or white.
The speaker has the ability to be mounted on walls,
ceilings, equipment racks and speaker stands with
appropriate hardware and accessories.
MOUNTING BRACKETS
SB-3BK+
40° tilt bracket
A multi-purpose bracket used
for mounting the AN-135+ to
a wall or ceiling.
Waste electrical and electronic products must not be disposed of with
household waste. Please recycle where facilities exist. Check with
your Local Authority or Retailer for recycling advice.
SB-360BK+
360° swivel bracket
A multi-purpose bracket used for
mounting the AN-135+ to a wall
or ceiling.
(1/4" PHONE)
BACK PANEL OF AN-135+
NOTE: When connecting multiple AN-135+ units (daisy chaining) stereo cable
MUST be used to avoid interference.
LINE IN
MADE IN USA
SIX YEAR WARRANTY
LINE IN/LINE OUT
(3.5 MM)
POWER ON
2