- ページ 4

計測機器 Alentec & Orion 24720のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alentec & Orion 24720 8 ページ。 In line meter

Alentec & Orion 24720 ユーザーマニュアル
Manual 24720_EN_2B

4.3. "Trip" counter

The meter is equipped with a "Tripp" counter that shows the accumulated volume of fluid dispensed since it was last
"RESET". The "Trip" counter can be zeroed, "re-set".
4.3.1.

Check the "Trip" counter

When the meter is in normal dispense mot the TRIP-counter can be shown by pressing the <Select> button.
Normal dispense mode.
Press <SELECT>. May need to be pressed more than once depending on
mode. The total volume (in whole units) since the last re-set is shown.
4.3.2.

Reset the "Trip" counter

When the meter is showing the TRIP-counter it could be se-set. This only re-sets the TRIP-counter nothing else.
Press <SELECT>. May need to be pressed more than once depending on
mode. The total volume (in whole units) since the last re-set is shown.
Press <RESET> to zero the TRIP-counter.

4.4. "Total" counter

The meter is equipped with a "Total" counter that shows the accumulated volume of fluid dispensed since the meter was put
into use. The "Total" counter cannot be zeroed (RESET)
4.4.1.

Check the "Total" counter

When the meter is in normal dispense mode the TOTAL-counter can be shown by pressing the <Select> button.
Normal dispense mode.
Press <SELECT>. May need to be pressed more than once depending on
mode. The total volume (in whole units) since the last re-set is shown.
4.4.2.

Reset the "Total" counter

The "Total" counter cannot be re-set to zero.
4(8)