Alentec & Orion 24720 사용자 설명서 - 페이지 4

{카테고리_이름} Alentec & Orion 24720에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alentec & Orion 24720 8 페이지. In line meter

Manual 24720_EN_2B

4.3. "Trip" counter

The meter is equipped with a "Tripp" counter that shows the accumulated volume of fluid dispensed since it was last

"RESET". The "Trip" counter can be zeroed, "re-set".

4.3.1.

When the meter is in normal dispense mot the TRIP-counter can be shown by pressing the <Select> button.

Normal dispense mode.

Press <SELECT>. May need to be pressed more than once depending on

mode. The total volume (in whole units) since the last re-set is shown.

4.3.2.

When the meter is showing the TRIP-counter it could be se-set. This only re-sets the TRIP-counter nothing else.

Press <SELECT>. May need to be pressed more than once depending on

mode. The total volume (in whole units) since the last re-set is shown.

Press <RESET> to zero the TRIP-counter.

The meter is equipped with a "Total" counter that shows the accumulated volume of fluid dispensed since the meter was put

into use. The "Total" counter cannot be zeroed (RESET)

4.4.1.

When the meter is in normal dispense mode the TOTAL-counter can be shown by pressing the <Select> button.

Normal dispense mode.

Press <SELECT>. May need to be pressed more than once depending on

mode. The total volume (in whole units) since the last re-set is shown.

4.4.2.

The "Total" counter cannot be re-set to zero.

4(8)