Alentec & Orion 24720 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади Alentec & Orion 24720. Alentec & Orion 24720 8 сторінок. In line meter
Друкувати сторінку
Manual 24720_EN_2B
4.3. "Trip" counter
The meter is equipped with a "Tripp" counter that shows the accumulated volume of fluid dispensed since it was last
"RESET". The "Trip" counter can be zeroed, "re-set".
4.3.1.
Check the "Trip" counter
When the meter is in normal dispense mot the TRIP-counter can be shown by pressing the <Select> button.
Normal dispense mode.
Press <SELECT>. May need to be pressed more than once depending on
mode. The total volume (in whole units) since the last re-set is shown.
4.3.2.
Reset the "Trip" counter
When the meter is showing the TRIP-counter it could be se-set. This only re-sets the TRIP-counter nothing else.
Press <SELECT>. May need to be pressed more than once depending on
mode. The total volume (in whole units) since the last re-set is shown.
Press <RESET> to zero the TRIP-counter.
4.4. "Total" counter
The meter is equipped with a "Total" counter that shows the accumulated volume of fluid dispensed since the meter was put
into use. The "Total" counter cannot be zeroed (RESET)
4.4.1.
Check the "Total" counter
When the meter is in normal dispense mode the TOTAL-counter can be shown by pressing the <Select> button.
Normal dispense mode.
Press <SELECT>. May need to be pressed more than once depending on
mode. The total volume (in whole units) since the last re-set is shown.
4.4.2.
Reset the "Total" counter
The "Total" counter cannot be re-set to zero.
4(8)