- ページ 9

ソーラーパネル Aleo ELEGANTEのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Aleo ELEGANTE 16 ページ。 Bipv modules
Aleo ELEGANTE にも：インストレーション・マニュアル (14 ページ)

8 .2 Electrical Connections

For modules connected in series, only modules of the

same amperage rating may be used together. For

modules connected in parallel, modules with the same

voltage ranges must be used together. The modules

must not be operated at a higher voltage than the

permissible system voltage.

Avoid standing water in the junction box area.

When mounting horizantally, make sure that the

junction boxes are facing upwards.

The junction boxes and the surrounding area (at least

15 mm from the glass edge inwards and at least 25

mm to the left and right of the junction box) must

be protected against direct sunlight, precipitation

and dirt.

The use of an aluminum clamping rail is recommended

for this purpose.

Only use cable couplers that are the same type and

compatible to the specific junction box.

Insert the cable couplers in the junction boxes only

through the outer slots on the left and on the right

of the module, as shown in the picture.

Figure 8D

Incompatible or unsuitable connectors can overheat.

Fire hazard!

Only use connectors that are the same type and

compatible to the specific inverter.

This module type can be fitted with the following

connectors:

TE - SOLARLOK Slim Line (Plus:1-1987559-1; Minus:

1-1987559-2)

You can remove the connector on a module and repla-

ce it with another connector, if necessary. You retain

aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | [email protected]

Installation Manual GG Elegante Rel. 1.5, 01/2022, EN