- ページ 15

スピーカー Bose FreeSpace DS 100SEのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Bose FreeSpace DS 100SE 21 ページ。 With ceiling mount bracket
Bose FreeSpace DS 100SE にも：オーナーズマニュアル (32 ページ), インストレーション・マニュアル (17 ページ), テクニカル・データシート (8 ページ), インストレーション・マニュアル (22 ページ), 設計マニュアル (4 ページ)

ページを印刷する

1. Freespace Ds 100Se Surface-Mount Loudspeaker

DISASSEMBLY PROCEDURES

8. Transformer Removal

8.1 Perform procedure 7.

8.2 Remove the four screws (5) that secure

the transformer (17) to the enclosure. Lift

out the transformer.

8.3 Make a note of the wiring configuration

and cut the wires that connect to the cross-

over PCB assembly (9) as close to the board

as possible.

9. Loudspeaker Mounting Bracket

Removal

9.1 Using a Phillips-head screwdriver, re-

move the four screws (13) that secure the

mounting bracket to the back of the loud-

speaker.

9.2 Slide the bracket (12) and rubber grom-

met (15) away from the speaker. Slide the

bracket off of the rubber grommet.

FreeSpace

DS 100F Flush-Mount

Loudspeaker

Note: Refer to Figure 5 for the following

procedures.

1. Grille Removal

1.1 Using a small tool, such as an awl,

carefully pry the grille (2) away from the front

baffle (8). Lift off the grille.

2. Logo Removal

2.1 Perform procedure 1.

2.2 Slide the retaining washer (3) off of the

logo's post. Lift the logo (1) off of the grille

(2).

3. Tweeter Driver Removal

3.1 Perform procedure 1.

3.2 Using a Phillips-head screwdriver, re-

move the four screws (24) that secure the

2.25" driver (4) to the baffle (8).

3.3 Lift out the driver. Disconnect the two

Faston connectors from the tweeter's termi-

nal strip.

4. Woofer Removal

4.1 Perform procedure 1.

4.2 Using a Phillips-head screwdriver, re-

move the four screws (18) that secure the

woofer (19) to the baffle (8).

4.3 Lift out the woofer. Disconnect the two

Faston connectors from the woofer's termi-

nal strip.