Bose FreeSpace DS 100SE 서비스 매뉴얼 - 페이지 15
{카테고리_이름} Bose FreeSpace DS 100SE에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose FreeSpace DS 100SE 21 페이지. With ceiling mount bracket
Bose FreeSpace DS 100SE에 대해서도 마찬가지입니다: 소유자 매뉴얼 (32 페이지), 설치 매뉴얼 (17 페이지), 기술 데이터 시트 (8 페이지), 설치 매뉴얼 (22 페이지), 디자인 매뉴얼 (4 페이지)
페이지 인쇄
DISASSEMBLY PROCEDURES
8. Transformer Removal
8.1 Perform procedure 7.
8.2 Remove the four screws (5) that secure
the transformer (17) to the enclosure. Lift
out the transformer.
8.3 Make a note of the wiring configuration
and cut the wires that connect to the cross-
over PCB assembly (9) as close to the board
as possible.
9. Loudspeaker Mounting Bracket
Removal
9.1 Using a Phillips-head screwdriver, re-
move the four screws (13) that secure the
mounting bracket to the back of the loud-
speaker.
9.2 Slide the bracket (12) and rubber grom-
met (15) away from the speaker. Slide the
bracket off of the rubber grommet.
FreeSpace
®
DS 100F Flush-Mount
Loudspeaker
Note: Refer to Figure 5 for the following
procedures.
1. Grille Removal
1.1 Using a small tool, such as an awl,
carefully pry the grille (2) away from the front
baffle (8). Lift off the grille.
2. Logo Removal
2.1 Perform procedure 1.
2.2 Slide the retaining washer (3) off of the
logo's post. Lift the logo (1) off of the grille
(2).
3. Tweeter Driver Removal
3.1 Perform procedure 1.
3.2 Using a Phillips-head screwdriver, re-
move the four screws (24) that secure the
2.25" driver (4) to the baffle (8).
3.3 Lift out the driver. Disconnect the two
Faston connectors from the tweeter's termi-
nal strip.
4. Woofer Removal
4.1 Perform procedure 1.
4.2 Using a Phillips-head screwdriver, re-
move the four screws (18) that secure the
woofer (19) to the baffle (8).
4.3 Lift out the woofer. Disconnect the two
Faston connectors from the woofer's termi-
nal strip.
15