- ページ 24

ヘッドセット Bose A20 AviationのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose A20 Aviation 44 ページ。 Aviation headset
Bose A20 Aviation にも：クイック・リファレンス・マニュアル (2 ページ), オーナーズマニュアル (43 ページ), オーナーズマニュアル (40 ページ), オーナーズマニュアル (44 ページ), オーナーズマニュアル (44 ページ), クイック・リファレンス・マニュアル (2 ページ)

ページを印刷する

Tab 8, 16

Tab 7, 15

SING THE

EADSET

Note: The Bose A20 Aviation Headset will automatically exit pairing mode after

five minutes of inactivity.

Bluetooth

indicator light status

The Bluetooth indicator is a blue light on the control module. It shows the status

of Bluetooth functions, as follows:

Appearance

Flashes slowly, alternating with the power indicator.

Flashes twice quickly with each power indicator

flash.

Flashes at the same rate with the power indicator

(green or amber).

Flashes once quickly with each power indicator flash. Headset is in an active phone call.

No light

Reconnecting to a previously connected phone

To reconnect the headset to a previously connected phone or other Bluetooth

wireless technology device, briefly press the Bluetooth function button on the

headset control module.

The headset control module attempts to connect with the last connected

Bluetooth wireless technology device.

Note: The Bose

wireless technology device at a time. If you press the Bluetooth function button on

the headset control module for more than five seconds, the currently connected

Bluetooth wireless technology device is disconnected and the control module

enters pairing mode.

Recovering a lost connection

When a connected Bluetooth wireless technology device moves out of range

and the connection is lost, the Bose A20 Aviation Headset automatically

attempts to reconnect. If a connection still does not exist after five minutes, the

Bluetooth wireless technology receiver in the control module remains on, but

not connected. The Bluetooth indicator on the Bose A20 Aviation Headset

control module will exhibit a fast double flash initiated at each power indicator

flash.

Disconnecting a Bluetooth technology-enabled phone

If you use a connected phone to end a Bluetooth wireless technology

connection, the Bluetooth technology receiver in the headset control module

remains on, but no longer attempts to connect. A Bluetooth wireless

technology connection is ended by turning the phone off, ending the current

call, or discontinuing the wireless connection.

Tab 6, 14

Tab 5, 13

A20™ Aviation Headset can only be connected to one Bluetooth

Tab 4, 12

Tab 3, 11

Indication

Headset is discoverable or is pairing.

Bluetooth technology is ON but not

connected to a phone.

Bluetooth technology is ON and

connected to phone.

Bluetooth technology is not enabled.

Tab2, 10

English