- ページ 10

セキュリティセンサー Abus PLSG10000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Abus PLSG10000 16 ページ。 Z-wave indoor siren
Abus PLSG10000 にも：クイックマニュアル (4 ページ)

2.3. Exclusion (Exclusion) / Teach device out

Activate the exclusion mode (learn-out mode) at the

gateway. (for further details please refer to the

gateways manual)

Press the "-" key (Remove / Exclusion) in your Z-

Wave app and follow the instructions to set the

gateway to exclusion mode.

Press the Link button 3 times quickly (within 1.5

seconds) to start the exclusion on the device.

The successful exclusion is displayed in the app or at

the gateway.

Press the Link button 3 times quickly (within 1.5

seconds).

Press quickly (within 1 second)

a fourth time and hold the Link button for at least 5

seconds.

The button is now reset to factory settings.

Hint:

Please use this procedure only when the network

primary controller is missing or otherwise inoperable.

If the device is set to factory default, the status is set

to "not included" and the association settings and

possible configurations are reset to default.

English