Abus PLSG10000 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Датчики безпеки Abus PLSG10000. Abus PLSG10000 16 сторінок. Z-wave indoor siren
Також для Abus PLSG10000: Короткий посібник (4 сторінок)

Друкувати сторінку

2.3. Exclusion (Exclusion) / Teach device out

2.4. Reset (factory reset) / reset factory settings

Activate the exclusion mode (learn-out mode) at the

gateway. (for further details please refer to the

gateways manual)

Press the "-" key (Remove / Exclusion) in your Z-

Wave app and follow the instructions to set the

gateway to exclusion mode.

Press the Link button 3 times quickly (within 1.5

seconds) to start the exclusion on the device.

The successful exclusion is displayed in the app or at

the gateway.

Press the Link button 3 times quickly (within 1.5

seconds).

Press quickly (within 1 second)

a fourth time and hold the Link button for at least 5

seconds.

The button is now reset to factory settings.

Hint:

Please use this procedure only when the network

primary controller is missing or otherwise inoperable.

If the device is set to factory default, the status is set

to "not included" and the association settings and

possible configurations are reset to default.

English