Abus PLSG10000 Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Czujniki bezpieczeństwa Abus PLSG10000. Abus PLSG10000 16 stron. Z-wave indoor siren
Również dla Abus PLSG10000: Skrócona instrukcja obsługi (4 strony)
Drukuj stronę2.3. Exclusion (Exclusion) / Teach device out
2.4. Reset (factory reset) / reset factory settings
Activate the exclusion mode (learn-out mode) at the
gateway. (for further details please refer to the
gateways manual)
Press the "-" key (Remove / Exclusion) in your Z-
Wave app and follow the instructions to set the
gateway to exclusion mode.
Press the Link button 3 times quickly (within 1.5
seconds) to start the exclusion on the device.
The successful exclusion is displayed in the app or at
the gateway.
Press the Link button 3 times quickly (within 1.5
seconds).
Press quickly (within 1 second)
a fourth time and hold the Link button for at least 5
seconds.
The button is now reset to factory settings.
Hint:
Please use this procedure only when the network
primary controller is missing or otherwise inoperable.
If the device is set to factory default, the status is set
to "not included" and the association settings and
possible configurations are reset to default.
10
English