- ページ 2

ラボラトリー機器 DURRIDGE RAD7のPDF ブルートゥース接続マニュアルをオンラインで閲覧またはダウンロードできます。DURRIDGE RAD7 4 ページ。 Passive, slow response radon in water accessory
DURRIDGE RAD7 にも：接続マニュアル (4 ページ), ユーザーマニュアル (7 ページ), ユーザーマニュアル (15 ページ)

ページを印刷する

Figure 1: The Keyspan Serial Assistant: This utility reveals the name of the COM port that has been created by

the USB to Serial Adaptor. In this case, it is "COM3".

4. Connect the SD1000's power cord and slide its power switch to the ON position.

5. Install and launch the ParaniWin application on the computer. Upon launching the program, a

dialog box titled UART Setting will appear, prompting you to specify a number of parameters, as

shown in Figure 2, below. Conﬁgure the device as follows: 

• Set the Serial Port to the appropriate setting, as determined in Step 3, above.

• Set the Baud Rate to 9600.

• Set the Parity None.

• Set the StopBit to 1.

Figure 2: The ParaniWin UART Setting Dialog: This dialog appears when launching ParaniWin. It is used to

locate the SD1000 Adaptor so that it can be conﬁgured.  