- ページ 7

シュレッダー Great Circle LCE01のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Great Circle LCE01 18 ページ。 Chipper shredder

ASSEMBLY

Install Stand (See Figure 1)

1. Position the stand (A) underneath the engine base

2. Using the four M8x60 bolts (C) and four nuts (D) to

tight the stand with the engine base plate

Install Chipper Cone (See Figure 3)

1. Position the chipper cone(B) over the three M8

thread studs protruding from the engine plate

2. Attach the three M8 flange nuts (C) and tighten to

secure the cone

3. Rubber cone cover (A) can be used when using the

vacuum function

Figure 1

Figure 3

Install the Wheels (See Figure 2)

1. Put the wheel onto the axle(B), Make sure the wheel

disc flat side face to machine.

2. Slide the washer (A) onto the axle against the wheel.

3. Insert the cotter pin (C) into the hole to secure the

wheel on the axle.

Install the Handle (See Figure 4)

1. Position the handle(A) to by aligning the handle holes

with the hopper holes on two sides

2. Using four flange bolts (C) and nuts (D) to secure the

handle on the hopper

Figure 2

Figure 4