- ページ 2
室内装飾品 Great Little Trading PhoenixのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Great Little Trading Phoenix 15 ページ。 Bunk bed
ページを印刷するSafety Warnings:
•
IMPORTANT – READ CAREFULLY – RETAIN FOR FUTURE REFERENCE
WARNING! Not suitable for children under 4 years. The upper bed is not
•
suitable for children under 6 years due to the risk of injury from falls.
•
When assembled in conformance with these instructions, this bed
conforms to BS EN 747:2012 Parts1&2 + A1:2015 and to
BS 8509:2008+A1:2011.
•
The recommended mattress size for the top bunk is 900mm x 1900mm x
150mm thick - see the All Rounder range at gltc.co.uk.
•
The lower bunk can have a thicker mattress, maximum 180mm thick.
See the Luxury or All Rounder Mattress range at gltc.co.uk.
•
Do not use this bed if any part is broken or missing.
•
Children can strangle on items such as ropes, strings, cords, harnesses and
belts attached to or hung on the bed.
•
Do not place this bed near heat sources, windows or other furniture.
Children can become trapped between the bed and the wall. To avoid
risk of serious injury, the distance between the top safety rail and the wall
should either be more than 230mm or less than 75mm, and should not be
between 75mm and 230mm.
•
When assembled as single beds - Children are likely to play, bounce, jump
and climb on beds, therefore the child's bed should not be placed too close
to other furniture or windows, and should be placed either tight to any wall
or have a gap 300mm between the wall and the side of the bed.
•
Adult assembly required.
•
Unassembled product contains small parts which may present a choking
hazard.
•
Children should be kept away from the product during assembly due to
possible risk of injury.
•
DO NOT use power tools in the assembly of this product as there is a risk
of over-tightening and consequently splitting of the wood.
•
Assemble and use on a flat and level surface.
•
Check all fixtures and fittings regularly and tighten as necessary.
•
Please ensure the room in which this bed is to be used is well ventilated or
aired regularly in order to keep humidity low and to prevent mould growth
in and around the bed.
Customer Service:
•
If you find that any components are missing or damaged, please do not
begin assembly and do not use the item. Please contact GLTC Customer
Services on 0344 848 6000 immediately.
•
We stock spare hardware at our warehouse, so we should be able to send
you missing parts immediately if required.
Product Care:
•
Wipe clean using a soft damp cloth followed by a dry cloth.
•
DO NOT use cleaning products which may contain ammonia, solvents or
abrasive material.
•
DO NOT expose the furniture to extremes of heat and humidity.
Could we do better?
•
If there is anything you think could be improved in these instructions or in
the assembly of this product we'd be grateful if you could let us know; we'll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
•
All you need to do is drop us a line at [email protected]
2