- ページ 5

室内装飾品 Great Little Trading PhoenixのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Great Little Trading Phoenix 15 ページ。 Bunk bed

Assembly: Phoenix Bunk Bed

STEP 3:

Assemble the upper bunk using the 2 x upper bunk

bed ends (A).

On the side which the long safety rail (D) will attach

to (back of bed), install 4 x threaded rods (#3) into

the bed posts.

Hardware for Step 3:

4x #3 Threaded Rod

STEP 4:

2 people required

Slide the long safety rail (D) onto the installed threaded rods on the low bed

ends, one end at a time - this will require 2 people.

Note: The hardware holes should be facing the outside of the bed. The maximum

mattress height mark (small groove) and label should be facing the inside of the bed

with the arrow facing down.

Once in position, secure one side of the long safety rail (D) with 2 x half moon

washer (#4) and 2 x nut (#5). Tighten with spanner.

Do not secure the other end of the long safety rail (D) at this stage, it will be

secured later in the process.

Hardware for Step 4:

2x #4 Half Moon Washer

2x #5 Nut