- ページ 4

室内装飾品 Great Little Trading PhoenixのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Great Little Trading Phoenix 15 ページ。 Bunk bed

Assembly: Phoenix Bunk Bed

STEP 1:

Assemble the lower bunk using 2 x lower bunk bed

ends (B) and 1 x side rail (C) with labels and 1 x side

rails (C) without labels.

Install 2 x barrel nuts (#2) into 1 x side rail (C) and

then position the side rail onto 1 x lower bunk bed

end (B). Note: Please ensure the inserts on the slat

support are facing up.

Install 2 x hex bolts (#1) through the bed end and

secure into the barrel nuts, tightening with allen key.

Repeat for the other side rail (C).

Hardware for Step 1:

4x #2 Barrel Nut

4x #1 Hex Bolt 90mm

STEP 2:

2 people required

Install 4 x barrel nuts (#2) into the open ends of

the side rails (C), then with the help of another

person, lift the side rails and guide onto 1 x high

bed end (B).

Whilst held in position install 4 x hex bolts (#1)

through the bed end, into the barrel nuts (#2) and

tighten with allen key.

Hardware for Step 2:

4x #2 Barrel Nut

4x #1 Hex Bolt 90mm