- ページ 8

コントローラー AGS Merlin 1000S+のPDF インストレーションオペレーション＆メンテナンスをオンラインで閲覧またはダウンロードできます。AGS Merlin 1000S+ 12 ページ。 Gas and electric isolation controller
AGS Merlin 1000S+ にも：ユーザーマニュアル (12 ページ)

ページを印刷する

Installation & Operation Manual

CO2 MONITOR & 12VDC

Primarily this is used to power the AGS CO2-X but can be used as a power output for external auxiliary

devices when there is power at the panel and can be used to create a relay switch with the BMS relay

output. Max output: 50mA. If no CO2 monitor or other device is connected, the panel will 'beep' upon

power up and the CO2 LED will flash 3 times to indicate that this terminal has been disabled.

Switch Settings – Auto Reset

When power is restored after the power cut/ loss, the panel has to be restarted

OFF

manually. (Default)

This will instruct the system to restart automatically when power is restored after

power cut/loss.

Switch Settings – BMS Integration

The panel can be integrated with a BMS to make or break a circuit when the gas is either on or off,

(valve open or valve closed). This will tell the BMS whether power is being sent to the solenoid valve.

OFF

Signals the BMS when gas is on or gas is off. (Default)

Signals the BMS on a fault i.e. high gas levels detected, emergency shut-off

activated etc.

Rev: 13

08-22

Merlin 1000S+