- ページ 6

計測機器 AgSense Crop Link ProのPDF 配線手順をオンラインで閲覧またはダウンロードできます。AgSense Crop Link Pro 12 ページ。 2017-18 4-20ma inputs and scaled voltage inputs
AgSense Crop Link Pro にも：配線手順 (12 ページ)

ページを印刷する

Wiring the G3 Tank Monitor sensor

1. Connect the Red wire from the Tank Monitor Sensor to the terminal marked 12V

OUT as shown above.

2. Connect the Black wire from the Tank Monitor Sensor to any terminal marked GND

as shown above.

3. Connect the White wire from the Tank Monitor Sensor to the terminal marked AN1

as shown above.

Note: Repeat steps 1-2 for a second Tank Monitor sensor, but connect the White wire to AN2

to the Crop Link Unit

instead.

Page 4