- ページ 5

回転する車輪 Majacraft Suzie ProfessionalのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Majacraft Suzie Professional 12 ページ。
Majacraft Suzie Professional にも：マニュアル (12 ページ)

ページを印刷する

3. Attach stem to base assembly

Required:

4 - M6 30mm JCB (1 1/4") bolts (in the hardware bag)

4mm allen T wrench (in the hardware bag)

Stem/Handle assembly

Base assembly

The drive wheel on the Stem/Handle assembly should go on the same

side of the Base assembly as the foot with the angles cut on the ends.

4. Fit the Pedals to the Base

Required:

12 - Gold 25mm (1") screws (in the hardware bag)

Posidrive screwdriver

Position the Base assembly on the flat surface.

Now slide the Stem/Handle assembly into the Base

assembly and carefully align the stem holes with the

base side plate holes. Insert the JCB bolts through

the holes and into the stem assembly. Partially

tighten the bolts, checking that they are threaded in

correctly before finally tightening all bolts.

majacraft