Majacraft Suzie Professional Manuel - Sayfa 5

Dönen Tekerlekler Majacraft Suzie Professional için çevrimiçi göz atın veya pdf Manuel indirin. Majacraft Suzie Professional 12 sayfaları.
Ayrıca Majacraft Suzie Professional için: Manuel (12 sayfalar)

Majacraft Suzie Professional Manuel
3. Attach stem to base assembly
Required:
4 - M6 30mm JCB (1 1/4") bolts (in the hardware bag)
4mm allen T wrench (in the hardware bag)
Stem/Handle assembly
Base assembly
The drive wheel on the Stem/Handle assembly should go on the same
side of the Base assembly as the foot with the angles cut on the ends.
4. Fit the Pedals to the Base
Required:
12 - Gold 25mm (1") screws (in the hardware bag)
Posidrive screwdriver
Position the Base assembly on the flat surface.
Now slide the Stem/Handle assembly into the Base
assembly and carefully align the stem holes with the
base side plate holes. Insert the JCB bolts through
the holes and into the stem assembly. Partially
3b
tighten the bolts, checking that they are threaded in
correctly before finally tightening all bolts.
3c
5
3a
3d
4a
majacraft
3e