Majacraft Suzie Professional 매뉴얼 - 페이지 5

{카테고리_이름} Majacraft Suzie Professional에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Majacraft Suzie Professional 12 페이지.
Majacraft Suzie Professional에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

페이지 인쇄

3. Attach stem to base assembly

Required:

4 - M6 30mm JCB (1 1/4") bolts (in the hardware bag)

4mm allen T wrench (in the hardware bag)

Stem/Handle assembly

Base assembly

The drive wheel on the Stem/Handle assembly should go on the same

side of the Base assembly as the foot with the angles cut on the ends.

4. Fit the Pedals to the Base

Required:

12 - Gold 25mm (1") screws (in the hardware bag)

Posidrive screwdriver

Position the Base assembly on the flat surface.

Now slide the Stem/Handle assembly into the Base

assembly and carefully align the stem holes with the

base side plate holes. Insert the JCB bolts through

the holes and into the stem assembly. Partially

tighten the bolts, checking that they are threaded in

correctly before finally tightening all bolts.

majacraft