- ページ 3
メディア・コンバーター Majella MCVCのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Majella MCVC 6 ページ。 Midi to cv converter
Majella MCVC にも: DIYマニュアル (15 ページ)
MCVC
User Manual
OVERVIEW
1. MIDI INPUT
This is a 5 pin DIN MIDI input connector,
which makes it possible to connect MIDI
devices to the MCVC.
2. MONO POLY SWITCH
The Mono/Poly switch lets you choose how
the MCVC processes the incoming MIDI
Data. In MONO mode each channel is
controlled
by
the
corresponding
MIDI
channel number. E.g. MIDI Channel 1
controls voice 1, MIDI channel 2 controls
voice 2 et. In POLY mode the MCVC listens
to MIDI channel 1 and uses the next
successive voice available. E.g. if voice 1 and
2 are occupied it twill use channel 3 for the
next note to play.
3. MIDI BEAT CLOCK
This is a MIDI BEAT CLOCK output which
can be used to synchronise externally
clocked gear such as: delays, LFOs, drum
computers etc. It outputs 24 pulses per
quarter notes.
4 CHANNEL OVERVIEW
Each number corresponds with the three
outputs below (GATE, PITCH and VEL)
5 GATE OUTPUTS
The GATE outputs, output a 5V signal
whenever a "note ON" is played on the
corresponding channel. The LED blinks red
to indicate when a note is played.
6 PITCH OUTPUTS
The pitch outputs output a 1V/Oct signal
corresponding to the MIDI note number
received at the corresponding channel.
3
©2018 Majella Audio