Majella MCVC User Manual - Page 3

Browse online or download pdf User Manual for Media Converter Majella MCVC. Majella MCVC 6 pages. Midi to cv converter
Also for Majella MCVC: Diy Manual (15 pages)

Print Page

MCVC

User Manual

OVERVIEW

1. MIDI INPUT

This is a 5 pin DIN MIDI input connector,

which makes it possible to connect MIDI

devices to the MCVC.

2. MONO POLY SWITCH

The Mono/Poly switch lets you choose how

the MCVC processes the incoming MIDI

Data. In MONO mode each channel is

controlled

the

corresponding

MIDI

channel number. E.g. MIDI Channel 1

controls voice 1, MIDI channel 2 controls

voice 2 et. In POLY mode the MCVC listens

to MIDI channel 1 and uses the next

successive voice available. E.g. if voice 1 and

2 are occupied it twill use channel 3 for the

next note to play.

3. MIDI BEAT CLOCK

This is a MIDI BEAT CLOCK output which

can be used to synchronise externally

clocked gear such as: delays, LFOs, drum

computers etc. It outputs 24 pulses per

quarter notes.

4 CHANNEL OVERVIEW

Each number corresponds with the three

outputs below (GATE, PITCH and VEL)

5 GATE OUTPUTS

The GATE outputs, output a 5V signal

whenever a "note ON" is played on the

corresponding channel. The LED blinks red

to indicate when a note is played.

6 PITCH OUTPUTS

The pitch outputs output a 1V/Oct signal

corresponding to the MIDI note number

received at the corresponding channel.