Majella MCVC 사용자 설명서 - 페이지 3
{카테고리_이름} Majella MCVC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Majella MCVC 6 페이지. Midi to cv converter
Majella MCVC에 대해서도 마찬가지입니다: DIY 매뉴얼 (15 페이지)
MCVC
User Manual
OVERVIEW
1. MIDI INPUT
This is a 5 pin DIN MIDI input connector,
which makes it possible to connect MIDI
devices to the MCVC.
2. MONO POLY SWITCH
The Mono/Poly switch lets you choose how
the MCVC processes the incoming MIDI
Data. In MONO mode each channel is
controlled
by
the
corresponding
MIDI
channel number. E.g. MIDI Channel 1
controls voice 1, MIDI channel 2 controls
voice 2 et. In POLY mode the MCVC listens
to MIDI channel 1 and uses the next
successive voice available. E.g. if voice 1 and
2 are occupied it twill use channel 3 for the
next note to play.
3. MIDI BEAT CLOCK
This is a MIDI BEAT CLOCK output which
can be used to synchronise externally
clocked gear such as: delays, LFOs, drum
computers etc. It outputs 24 pulses per
quarter notes.
4 CHANNEL OVERVIEW
Each number corresponds with the three
outputs below (GATE, PITCH and VEL)
5 GATE OUTPUTS
The GATE outputs, output a 5V signal
whenever a "note ON" is played on the
corresponding channel. The LED blinks red
to indicate when a note is played.
6 PITCH OUTPUTS
The pitch outputs output a 1V/Oct signal
corresponding to the MIDI note number
received at the corresponding channel.
3
©2018 Majella Audio