- ページ 17
おもちゃ Century Helicopter Products Predator 70のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Century Helicopter Products Predator 70 20 ページ。
ページを印刷する
#HI6067
Horizontal
Fin
Insert the M3 socket screws through the top of the plastic fin
and through the top tail fin mount (straight ends). Notice that
the bottom fin mount is angled for comparison.
#HI6067A Carbon
Horizontal Fin
Insert the M3 socket screws through the top of the carbon
fin and through the top tail fin mount (straight ends).
Notice that the bottom fin mount is angled for comparison.
#M3x35 Socket Screws x 2
& M3 Locknuts x 2
Slide the bottom fin mount (taller side of angled ends
towards the mechanics) over the M3 screws and insert the
aluminum tail struts and secure with M3 locknuts.
#HI6068 Tail Fin
85
Mount Set
M3x35 Socket
Screws x 2
60/70 only.
87
#HI6068 Tail Fin
Mount Set
M3x40 Socket
Screws x 2
SE & Max 90
only.
89
Angled
bottom fin
mount
#HI6067
Vertical Fin
Insert the M3 socket screws through the front holes in the
plastic vertical fin and through the vertical fin mount.
#M3x40 Socket Screws x 2
& M3 Locknuts x 2
Slide the bottom fin mount (taller side of angled ends
towards mechanics) over the M3 screws and insert the
carbon tail struts and secure with M3 locknuts.
M3x12 Socket Screws x 2 &
M3 Locknuts x 2
Attach the struts (aluminum or carbon) to the main mechanics
using M3 socket screws, M3x9x3 plastic spacer on the outside
and secure with M3 locknuts on the inside of the frames.
86
M3x35 Socket
Screws x 2
88
Angled
bottom fin
mount
90
M3x9x3
Spacer x 2
17